Product overview:
At present, the main communication way of power information acquisition system is power carrier communication. Because of the unstable carrier channel and low communication rate, the success rate of data acquisition is not high and the real-time performance is poor, which can not fully meet the requirements of real-time acquisition and remote data transmission. The newly developed BGE1J0A001 Ethernet centralized meter reading module of our company can be used in conjunction with the collector I which meets the national grid standard, so that the collector can communicate directly with the main station to achieve the purpose of remote data acquisition.
Product characteristics:
The size is small, and the size of single-phase carrier module is the same.
Easy to use, just replace the carrier module of the collector.
Save cost and do not need to dismantle the original collector.
It is powerful and can collect data while replacing the collector while meeting the needs of the collector.
Transmission speed is up to 100Mbps.
The real time state of the remote meter can be real-time, and the delay time is less than 2 seconds.
The uplink channel is Ethernet, which directly interacts with the master station.
Power storage function, 7 days of frozen power, 3 months of frozen power;
It supports reading more than one meter clock and intelligently judging the calibration time.
It has the function of infrared communication, which is convenient for on-site debugging and testing settings.
Performance parameters:
Communication rate: 100Mbps
Working temperature: -40 C ~ +70 C
Relative humidity: 10% ~ 100%
Static power consumption: less than 0.25W
Dynamic power: less than 1.5W